- Warmth and softness
- Insulation against the cold
- Resistance to abrasion
Download your useful documents
Detailed description
Designed with 100% polyester material made of microfibres, this insole does not distort or decay. It is very resistant to abrasion, and its edging allows it to lie flat in the shoe.
- In microfiber : does not distort, rot proof (100% polyester)
- Bordering insole
Composition
- 100% polyester microfibre fleece
- 100% polyester needled felt underside
- Green edging 100% polyamide in scraped mesh
Regulatory standards
| RÉFÉRENCE | NORME | MÉTHODES D’ESSAIS | RÉSULTATS |
|---|---|---|---|
| EN 12746 | Water absorption : Water desorption : |
Absorption power : Desorption % of water after 16 hours : |
282 mg/cm² 48% |
| 20344 §6.12 | Resistance to abrasion | Cycles to produce a hole > Dry test > Wet test |
>25 600 >12 800 |
Cost simulation
Find out what this product really costs you
The frequency of renewal of a product depends on its durability and quality and conditions its real cost. By taking these parameters into account, we have simulated the real cost per user and per month on the basis of an indicative selling price*. This simulation also allows you to compare products of the same range in an objective way with a common calculation basis.
Note: we also provide an excel file to compare the products with your own prices. How does it work? It’s simple, enter your prices in the corresponding cells and the table does the rest!
*Indicative price, actual price lower at our dealers. Please contact your dealer for more information.
Cost per user
and per month
Jonathan Lamy, the French himalayist who climbed Everest and Lhotse, used the JLF Pro products for his adventure.
Products associated with
Insoles polar
The effectiveness of one PPE product depends on another!
To optimise the performance of your product, complement it with an associated product.
